2025-11-15T04:37:11.885518

New Insights into the Dependence of Glass Transition Temperature and Dynamic Fragility on Molecular Weight in Oligomers and Polymers

Ginzburg, Gendelman, Casalini et al.

In an earlier preprint (V. V. Ginzburg, O. V. Gendelman, R. Casalini, and A. Zaccone, arxiv:2409.17291), we demonstrated that the dynamic (relaxation time) and volume equations of state for many amorphous polymers are near-universal -- each material is characterized by two governing parameters -- the glass transition temperature, T_{g}, and the elementary relaxation time, /tau_{el}. The dynamic fragility, m, is uniquely related to /tau_{el}. The earlier analysis was based on the data for high polymers (degree of polymerization, N > 200, and molecular weight, Mw > 20,000 g/mol). Here, we investigate the dependence of T_{g} and /tau_{el} on N (or, equivalently, on the molecular weight, M). We consider the dielectric spectroscopy data for homologous series of four polymers: polystyrene (PS), poly-(2-vinylpyridine) (P2VP), poly(dimethylsiloxane) (PDMS), and polybutadiene (PB). It is shown that the relaxation time curves for various oligomers can be successfully collapsed onto the same master curve as the high polymers. The glass transition temperature and the dynamic fragility are found to be linear functions of 1/M, in agreement with the Fox-Flory equation. The scaling results are interpreted based on the SL-TS2 theory, ensuring that the model description is consistent with the Boyer rules for the coefficients of thermal expansion above and below T_{g}, as well as the thermodynamical scaling for the pressure dependence of the relaxation time.

academic

New Insights into the Dependence of Glass Transition Temperature and Dynamic Fragility on Molecular Weight in Oligomers and Polymers

基本信息

论文ID: 2501.00956
标题: New Insights into the Dependence of Glass Transition Temperature and Dynamic Fragility on Molecular Weight in Oligomers and Polymers
作者: Valeriy V. Ginzburg (Michigan State University), Oleg V. Gendelman (Technion), Riccardo Casalini (Naval Research Laboratory), Alessio Zaccone (University of Milan)
分类: cond-mat.soft (软凝聚态物理)
发表时间: 2025年1月
论文链接: https://arxiv.org/abs/2501.00956

摘要

本文是作者前期工作(ArXiv:2409.17291)的延续，前期工作证明了无定形聚合物的动态(弛豫时间)和体积状态方程具有"近通用性"——每种材料由两个控制参数表征：玻璃化转变温度Tg和基本弛豫时间τel。本研究将分析扩展到低分子量范围，研究Tg和τel对聚合度N(或分子量M)的依赖性。通过分析四种聚合物的介电谱数据(聚苯乙烯PS、聚2-乙烯基吡啶P2VP、聚二甲基硅氧烷PDMS、聚丁二烯PB)，证明了不同寡聚物的弛豫时间曲线可以成功地与高聚物坍缩到同一主曲线上。玻璃化转变温度和动态脆性被发现是1/M的线性函数，符合Fox-Flory方程。

研究背景与动机

问题背景

核心问题: 理解聚合物和寡聚物的玻璃化转变温度(Tg)和动态脆性(m)如何依赖于分子量，这是聚合物科学中的基础问题
历史发展: Fox和Flory在1950年代建立了PS的Tg与数均分子量Mn的关系：Tg(Mn) = Tg,∞ - K/Mn，但其物理机制仍存在争议
理论争议: 关于链端效应的解释存在分歧——是由于链端具有更高自由体积起到增塑剂作用，还是链端对主链旋转刚性的影响

研究重要性

基础科学价值: 揭示分子量对玻璃化转变的根本影响机制
实用意义: 指导聚合物材料的分子设计和性能预测
理论完善: 验证和扩展SL-TS2理论框架在不同分子量范围的适用性

现有方法局限性

数据范围限制: 前期研究主要集中在高聚物(N>200, Mw>20,000 g/mol)
理论不统一: 缺乏统一的理论框架同时描述动态和热力学行为
脆性研究不足: 对动态脆性随分子量变化的系统研究较少

核心贡献

扩展了SL-TS2理论的适用范围: 将"近通用"行为从高聚物扩展到寡聚物(M>1000 g/mol)
建立了统一的标度关系: 证明了不同分子量的聚合物弛豫时间曲线可坍缩到同一主曲线
验证了Fox-Flory关系的普遍性: 在四种不同聚合物体系中确认了Tg和m与1/M的线性关系
提供了定量的分子量依赖参数: 给出了各聚合物体系的特征分子量参数(MX, Mg, Mm)

方法详解

理论框架：SL-TS2模型

SL-TS2(Sanchez-Lacombe two-state, two-scale)理论是作者开发的双态自由体积理论，核心方程为：

$\log\tau = \log\tau_{el} - \frac{1}{\beta-1}\log\left(1-\left(\frac{T_x}{T}\right)^\beta\right)$

其中β = 1.12是幂律指数，x = (T/Tx)^β。

参数关系

模型参数Tx和τel与标准参数Tg和m的关系：

$T_g = T_x\left[1 + (2\log\tau_{el})^{1/(\beta-1)}\right]$

$m = \frac{T_x}{[1 + (2\log\tau_{el})^{1/(\beta-1)}]^{1+1/(\beta-1)} - (2\log\tau_{el})^{1/(\beta-1)}}$

分子量依赖性

各参数对分子量的依赖性表达为：

$T_X(M) = T_{X,\infty}\left(1 - \frac{M_X}{M}\right)$ $T_g(M) = T_{g,\infty}\left(1 - \frac{M_g}{M}\right)$ $m(M) = m_\infty\left(1 - \frac{M_m}{M}\right)$