2025-11-17T19:58:12.278309

Resolving the Structural Duality of Graphene Grain Boundaries

Guo, Ventura-MacÃas, JimÃ©nez-SÃ¡nchez et al.

Grain boundaries (GBs) are ubiquitous in large-scale graphene samples, playing a crucial role in their overall performance. Due to their complexity, they are usually investigated as model structures, under the assumption of a fully relaxed interface. Here, we present cantilever-based non-contact atomic force microscopy (ncAFM) as a suitable technique to resolve, atom by atom, the complete structure of these linear defects. Our experimental findings reveal a richer scenario than expected, with the coexistence of energetically stable and metastable graphene GBs. Although both GBs are structurally composed of pentagonal and heptagonal like rings, they can be differentiated by the irregular geometric shapes present in the metastable boundaries. Theoretical modeling and simulated ncAFM images, accounting for the experimental data, show that metastable GBs form under compressive uniaxial strain and exhibit vertical corrugation, whereas stable GBs remain in a fully relaxed, flat configuration. By locally introducing energy with the AFM tip, we show the possibility to manipulate the metastable GBs, driving them toward their minimum energy configuration. Notably, our high-resolution ncAFM images reveal a clear dichotomy: while the structural distortions of metastable grain boundaries are confined to just a few atoms, their impact on graphene's properties extends over significantly larger length scales.

academic

Resolving the Structural Duality of Graphene Grain Boundaries

基本信息

论文ID: 2510.10491
标题: Resolving the Structural Duality of Graphene Grain Boundaries
作者: Haojie Guo, Emiliano Ventura-Macías, Mariano D. Jiménez-Sánchez等
分类: cond-mat.mtrl-sci cond-mat.mes-hall
发表期刊: Advanced Materials (Wiley-VCH)
论文链接: https://arxiv.org/abs/2510.10491

摘要

石墨烯晶界(GBs)在大规模石墨烯样品中普遍存在，对其整体性能起着关键作用。由于其复杂性，通常将其作为完全松弛界面的理想模型结构进行研究。本研究采用悬臂式非接触原子力显微镜(ncAFM)技术，逐原子解析这些线性缺陷的完整结构。实验发现了比预期更丰富的情况：石墨烯晶界存在能量稳定和亚稳态两种共存形式。虽然两种晶界在结构上都由五边形和七边形环组成，但可通过亚稳态边界中存在的不规则几何形状加以区分。理论建模和模拟ncAFM图像表明，亚稳态晶界在压缩单轴应变下形成并表现出垂直波纹，而稳定晶界保持完全松弛的平面构型。通过AFM尖端局部引入能量，展示了操控亚稳态晶界使其趋向最小能量构型的可能性。

研究背景与动机

问题定义

核心问题：大规模生产的石墨烯中普遍存在晶界缺陷，这些缺陷显著影响石墨烯的电学、机械、热学和化学性质，但传统研究多基于理想化的完全松弛界面模型。
重要性：
- 机械剥离石墨烯具有近乎完美的晶体结构，但工业规模生产不可避免地引入缺陷
- 晶界在多晶石墨烯的各种性质中起关键作用
- 理解和控制这些缺陷对于大规模石墨烯应用至关重要
现有方法局限性：
- 透射电子显微镜(TEM)：需要自支撑样品，电子束可能引起结构转变或损伤
- 扫描隧道显微镜(STM)：隧道电流反映地形和局域态密度的卷积，(√3×√3)-R30°模式掩盖了真实原子结构
- 传统ncAFM：需要CO或Xe功能化尖端，在化学惰性基底上难以实现
研究动机：开发能够在石墨烯基底上直接进行原子级成像的技术，揭示晶界的真实结构多样性。