Propagation Distance Estimation for Radio over Fiber with Cascaded Structure

Basic Information

• Paper ID: 2410.02514
• Title: Propagation Distance Estimation for Radio over Fiber with Cascaded Structure
• Authors: Dexin Kong, Diana Pamela Moya Osorio, Erik G. Larsson (Linköping University)
• Classification: eess.SP (Signal Processing)
• Publication Date: October 2024 (arXiv preprint)
• Paper Link: https://arxiv.org/abs/2410.02514

Abstract

Based on recent developments in polymer microwave fiber (PMF), this paper investigates signal propagation distance estimation in sub-terahertz band radio over fiber (ROF) systems with cascaded structure. The paper proposes a novel cascaded architecture that interconnects multiple radio units (RUs) via optical fiber, suitable for indoor scenario applications. The research accounts for cascaded distortion effects introduced by nonlinear power amplifiers and models the propagation channel based on measured data from sub-terahertz signal transmission in high-density polyethylene optical fiber. For the propagation distance estimation problem, a nonlinear least squares algorithm is proposed. Simulation results demonstrate that the proposed estimator achieves good propagation distance estimation performance even in the presence of cascaded nonlinear power amplifier effects.

Research Background and Motivation

Problem Definition

The core problem addressed in this research is estimating the propagation distance of sub-terahertz signals in cascaded ROF systems, particularly determining the specific radio unit location accessed by user equipment (UE).

Importance Analysis

1. Growing Spectrum Demand: With increasing wireless connectivity requirements, there is a need to develop underutilized high-frequency spectrum resources
2. 6G Communication Requirements: The sub-terahertz band provides abundant spectrum opportunities for sixth-generation wireless communication systems
3. Cost-Effectiveness: Given the high cost of sub-terahertz RF hardware and limited coverage range, low-cost, high-density deployment solutions are needed

Limitations of Existing Methods

• Implementation of sub-terahertz wireless communication systems still faces technical challenges
• Traditional ROF systems insufficiently account for nonlinear amplifier effects in cascaded structures
• Lack of signal propagation analysis for dispersive PMF and nonlinear amplifier cascaded connections

Research Motivation

The development of PMF technology provides opportunities for low-cost implementation of sub-terahertz wireless systems, but requires addressing signal distortion and propagation distance estimation challenges in cascaded structures.

Core Contributions

1. Cascaded Structure Analysis: First analysis of cascaded structures containing nonlinear power amplifiers and dispersive PMF, establishing corresponding uplink signal models
2. Optimization Framework: Proposes a propagation distance estimation optimization framework based on nonlinear least squares (NLS)
3. Measured Data Validation: Numerical verification using measured PMF dispersion characteristics and different nonlinearity factor values, demonstrating algorithm effectiveness
4. Theoretical Contribution: First study of signal propagation through cascaded dispersive PMF segments and nonlinear amplifiers

Methodology Details

Task Definition

Input: Known sequence signals transmitted by user equipment Output: Estimated propagation distance corresponding to optical fiber segment number r, thereby determining the RU location accessed by UE Constraints: Considering wireless channel, optical fiber dispersion, nonlinear amplifier distortion, and noise effects

Model Architecture

1. System Model

The system comprises M components interconnected via PMF, with each RU equipped with antennas, power amplifiers, and other components. Signals are sequentially amplified and forwarded through each RU, ultimately reaching the central unit (CU).

2. Linear Power Amplifier Scenario

For a unit-length optical fiber segment, the impulse response is modeled as:

h_n = Σ(l=0 to L-1) β_l δ(n-l)

Frequency response after propagation distance D = r·d_f:

H̃_k = H_k^r

Received signal model:

x_k^(r) = G^(r+1) H_k^r A e^(-j2πf_k τ) s_k + w_k^(r-1)

3. Nonlinear Power Amplifier Scenario

Nonlinear effects are modeled using third-order polynomial:

x_n^(1) = G(x_n^(0) + λx_n^(0)|x_n^(0)|²) + w_n^(0)

Define composite function f(·) describing joint effects of channel dispersion and nonlinearity:

f(x_n^(1)) = G[Σβ_l x_{n-l}^(1) + λΣβ_l x_{n-l}^(1)|Σβ_l x_{n-l}^(1)|²]

Technical Innovations

1. Cascaded Effect Modeling: First integration of nonlinear amplifier and dispersive fiber cascaded effects into a unified framework
2. NLS Optimization Method: Coordinate descent algorithm designed for nonlinear parameter estimation
3. Measured Data Integration: Integration of measured D-band (110-170 GHz) data from high-density polyethylene fiber into simulations
4. Multi-Parameter Joint Estimation: Simultaneous estimation of complex gain A, propagation delay τ, and fiber segment number r

Experimental Setup

Dataset

• Fiber Characteristics: Measured D-band data from 1-meter high-density polyethylene PMF in reference 13
• Frequency Range: 110-170 GHz, bandwidth 1 GHz, center frequency 140 GHz
• Signal Modulation: Known sample sequences with QPSK waveforms

Evaluation Metrics

• Error Rate: Estimation error probability when r̂ ≠ r
• Input Amplitude Range: 0.1-0.8 volts

Comparison Methods

Comparison of two nonlinearity factors:

• λ₁ = -4e^(j0.2)/27
• λ₂ = -8e^(j0.2)/27

Implementation Details

• System Configuration: 5 RUs + 1 CU
• Amplification Gain: G = 2.4 dB (compensating maximum fiber attenuation)
• Noise Variance: σ² = 0 dB
• Test Scenario: UE accesses system through the 3rd RU

Experimental Results

Main Results

1. Performance Trend: Error rate significantly decreases with increasing input amplitude, from 10⁰ to 10⁻⁵
2. Nonlinearity Impact: Higher nonlinearity factor (λ₂) leads to reduced estimation accuracy
3. Algorithm Effectiveness: Algorithm accurately estimates propagation distance even under nonlinear PA operation

Key Findings

• Algorithm performs well in both linear and nonlinear amplifier scenarios
• Input signal amplitude is a key factor affecting estimation performance
• Increased nonlinearity introduces certain accuracy loss, but remains within acceptable ranges

Related Work

Main Research Directions

1. Sub-Terahertz Communications: Spectrum utilization, propagation characteristics, system implementation
2. ROF Technology: Optical wireless system design, signal processing
3. PMF Development: Polymer microwave fiber materials and transmission characteristics

Advantages of This Work

• First combination of measured PMF data and nonlinear amplifier modeling
• Provides comprehensive analysis framework for cascaded ROF systems
• Algorithm has practical application value

Conclusions and Discussion

Main Conclusions

1. The proposed NLS framework effectively estimates signal propagation distance in cascaded ROF systems
2. Algorithm maintains good performance in the presence of nonlinear power amplifiers
3. Provides feasible solution for user localization in sub-terahertz communication systems

Limitations

1. Only considers third-order nonlinearity model; actual PAs may exhibit more complex nonlinear characteristics
2. Assumes ideal clock synchronization; practical systems may face more complex synchronization challenges
3. Noise model is relatively simplified, not accounting for various interference in real environments

Future Directions

The paper proposes considering adaptive gain control loops to make PA gain adaptive, which will be an important direction for future research.

In-Depth Evaluation

Strengths

1. Strong Innovation: First study of propagation distance estimation in cascaded PMF-RU structures
2. High Practical Value: Provides low-cost deployment solution for 6G sub-terahertz communication systems
3. Complete Methodology: Forms complete chain from theoretical modeling to algorithm design to simulation verification
4. Realistic Data: Use of measured fiber characteristics data enhances result credibility

Weaknesses

1. Limited Experimental Scale: Verification only in small-scale system with 5 RUs
2. Single Scenario: Primarily targets indoor scenarios; applicability to outdoor applications unknown
3. Insufficient Comparison: Lacks performance comparison with other propagation distance estimation methods
4. Missing Complexity Analysis: Lacks detailed computational complexity analysis of the algorithm

Impact

1. Academic Contribution: Provides new research direction for ROF system signal processing field
2. Practical Value: Provides technical support for actual deployment of 6G communication systems
3. Extensibility: Methodological framework extensible to other frequency bands and application scenarios

Applicable Scenarios

• Sub-terahertz communication deployment in high-density indoor user environments
• Wireless communication systems requiring precise user localization
• Low-cost ROF system design based on PMF

References

The paper cites 13 relevant references covering key works in sub-terahertz communications, ROF technology, nonlinear amplifier modeling, and other critical domains, providing solid theoretical foundation for the research.

Overall Assessment: This paper proposes an innovative propagation distance estimation method for emerging PMF-ROF systems with strong theoretical significance and practical value. Although there are certain limitations in experimental scale and scenario diversity, it provides valuable technical contributions to the development of 6G sub-terahertz communication systems.