Space-based cm/kg-scale Laser Interferometer for Quantum Gravity

Basic Information

• Paper ID: 2507.12899
• Title: Space-based cm/kg-scale Laser Interferometer for Quantum Gravity
• Authors: Nobuyuki Matsumoto, Katsuta Sakai, Kosei Hatakeyama, Kiwamu Izumi, Daisuke Miki, Satoshi Iso, Akira Matsumura, Kazuhiro Yamamoto
• Classification: gr-qc astro-ph.IM physics.ins-det quant-ph
• Publication Date: October 14, 2025 (arXiv v2)
• Paper Link: https://arxiv.org/abs/2507.12899

Abstract

This study proposes a space-based laser interferometer inspired by LISA Pathfinder for verifying the quantum nature of gravity. The design employs two kilogram-scale gold-platinum alloy test masses placed side-by-side at centimeter-scale separation in a shielded environment below 1K. Gravity-induced entanglement (GIE) is detected through simultaneous measurement of differential and common-mode motion. The study considers noise sources including gas damping, blackbody radiation, and cosmic ray collisions. Simulation results demonstrate that GIE can be achieved through minor modifications to LISA Pathfinder.

Research Background and Motivation

Problem Definition

Experimental verification of quantum gravity represents a major challenge in modern physics. Traditional approaches struggle to observe quantum gravity effects at laboratory scales because the Planck scale far exceeds current experimental capabilities.

Research Significance

1. Theoretical Breakthrough: Verifying the quantum nature of gravity would provide direct experimental evidence for quantum gravity theories
2. Technological Innovation: Advances precision measurement technology, particularly space-based gravitational wave detection
3. Fundamental Physics: May reveal the unification mechanism between gravity and other fundamental interactions

Limitations of Existing Methods

1. Astrophysical Observation Constraints: While astrophysical observations have verified general relativity, they cannot directly prove the quantum nature of gravity
2. Ground-based Experimental Challenges: Ground vibrations and gravity gradient noise severely limit measurement precision
3. Weak Signal: Gravitational interactions are extremely weak, requiring extremely high measurement precision

Innovative Approach

Utilizes fundamental theorems from quantum information theory: quantum entanglement cannot be generated through local operations and classical communication (LOCC). If gravity can be shown to generate entanglement, this directly proves gravity's quantum nature.

Core Contributions

1. Proposed Space-based Quantum Gravity Experiment Scheme: Designed a space interferometer based on LISA Pathfinder specifically for detecting gravity-induced entanglement
2. Optimized Experimental Parameters: Determined optimal mass scale (kilogram-level) and separation distance (centimeter-level) through theoretical analysis
3. Comprehensive Noise Modeling: Systematically analyzed key noise sources including gas damping, blackbody radiation, and cosmic rays
4. Quantum Measurement Simulation: Developed a quantum measurement simulation framework based on Kalman filtering
5. Feasibility Verification: Demonstrated that GIE signals can be detected within approximately 40 days of integration time

Methodology Details

Task Definition

Input: Position and momentum measurement data of two interacting kilogram-scale test masses Output: Detection results of gravity-induced entanglement Constraints: Achieve sufficiently low noise levels in the space environment to observe weak quantum gravity effects

Theoretical Framework

System Modeling

Consider a system of two mirrors (TM1 and TM2) with mass m coupled through gravity. Laser illumination of the test masses yields zero-detuning measurement results:

$Y_\pm = C_\pm x_\pm + y^{in}_\pm$

Where:

• $Y_\pm$ represents phase quadrature components
• $C_\pm = (-\alpha_\pm, 0, 0)$ are optomechanical coupling constants
• $x_\pm = (q_\pm, p_\pm, r_\pm)^T$ contains position, momentum, and auxiliary variables
• $y^{in}_\pm$ represents vacuum noise

Gravitational Coupling Parameter

Gravitational coupling strength is described by parameter δ: $\delta = \Lambda \times \frac{4Gm}{\Omega^2 L^3}$

Where Λ is a shape factor accounting for finite-size effects, G is the gravitational constant, Ω is the resonance frequency, and L is the center-of-mass separation.

Entanglement Criterion

Entanglement negativity quantifies Gaussian state entanglement: $E_N = -\frac{1}{2}\log_2\left[\frac{\Sigma - \sqrt{\Sigma^2 - 4\det V}}{2}\right]$

The system exhibits entanglement when $E_N > 0$.

Kalman Filter Estimation

Quantum Kalman filtering is employed for optimal state estimation:

$\dot{\hat{x}}_\pm = A_\pm \hat{x}_\pm + K_\pm(Y_\pm - C_\pm \hat{x}_\pm)$$\dot{V}_\pm = A_\pm V_\pm + V_\pm A_\pm^T + N_\pm - (V_\pm C_\pm^T + L_\pm)(V_\pm C_\pm^T + L_\pm)^T$

Noise Source Analysis

Gas Damping

$\Gamma_{gas} = \frac{PR^2\sqrt{8\pi m_{atom}}}{m\sqrt{k_B T_{env}}}\left(1 + \frac{h}{2R} + \frac{\pi}{4}\right)$

Blackbody Radiation

Includes three contributions: scattering, absorption, and emission: $\Gamma_{scat} = \frac{8!8\hbar R^6}{9\pi m}\left(\frac{k_B T_{env}}{\hbar c}\right)^8 \zeta(9)\text{Re}\left[\frac{\varepsilon-1}{\varepsilon+2}\right]^2$

Cosmic Ray Collisions

Cosmic ray collision effects on test masses are evaluated through Geant4 Monte Carlo simulation, with results indicating 12% duty cycle requirement to meet specifications.

Experimental Setup

System Parameters

• Test Mass: 1 kg gold-platinum alloy cylinder
• Resonance Frequency: $\Omega_+/(2\pi) = 2.5 \times 10^{-4}$ Hz
• Center-of-Mass Separation: $L = 1.25h$ (approximately 1.25 cm surface separation)
• Environmental Temperature: $T_{env} = 0.1$ K
• Vacuum Level: $5 \times 10^{-15}$ Pa
• Laser Power: Approximately 0.14 μW

Key Technical Requirements

1. Ultra-High Vacuum: Requires achievement of $5 \times 10^{-15}$ Pa ultra-high vacuum
2. Cryogenic Temperature: Test masses must be cooled to approximately 12 K
3. Vibration Isolation: Utilizes space environment to avoid ground vibration interference
4. Precision Control: Requires electrostatic feedback system for precise resonance frequency adjustment

Experimental Results

Primary Results

Through approximately 100 simulation runs, probabilities of observing GIE at different integration times were calculated:

• $10^5$ s: 13%
• $5 \times 10^5$ s: 34%
• $2 \times 10^6$ s: 79%
• $3 \times 10^6$ s: 88%

Extrapolation results indicate that achieving 99.7% confidence requires $3.5 \times 10^6$ s (approximately 40 days) of measurement time.

Parameter Optimization Analysis

Effects of mass and temperature on experimental feasibility were investigated:

• Mass Optimization: Kilogram-scale mass achieves optimal balance between gas damping and blackbody radiation
• Temperature Requirements: Must satisfy $\Gamma T/(2\pi) \leq 4.5 \times 10^{-19}$ Hz·K
• Distance Effects: Smaller separation ($L = 1.25h$) requires approximately 10 times shorter integration time compared to larger separation ($L = 4h/3$)

Noise Budget

Analysis of various noise source contributions shows:

1. Thermal Noise: Dominates low-frequency noise
2. Shot Noise: Limits high-frequency measurement precision
3. Radiation Pressure Noise: Important near resonance frequency
4. Cosmic Rays: Can be effectively mitigated through data processing

Technical Challenges and Solutions

Key Challenges

1. Common-Mode Measurement: Requires simultaneous precise measurement of differential and common-mode motion
2. Low-Frequency Noise: Low-frequency noise sources such as stiction effects remain insufficiently understood
3. Engineering Implementation: Design of locking mechanisms in extreme environments

Solutions

1. Passive Shielding: Employs tungsten alloy shields to reduce solar radiation pressure noise
2. Formation Flying: Science module and shielding module fly separately at 275-meter distance
3. Cryogenic Technology: Uses adiabatic demagnetization refrigeration to achieve 0.05 K

Related Work

Quantum Gravity Experimental Methods

1. Signal Amplification Methods: Utilizes optomechanical systems to enhance gravitational coupling
2. Direct Noise Reduction Methods: Reduces decoherence through cryogenic temperatures and ultra-high vacuum
3. Noise-Tolerant Methods: Develops measurement protocols insensitive to noise

Comparison with Existing Schemes

Compared to optical cavity-based schemes, the proposed cavity-free laser interferometer offers:

• Superior vibration isolation performance
• Simpler optical systems
• Better suitability for space environment applications

Conclusions and Discussion

Main Conclusions

1. Theoretical Feasibility: GIE detection in space environment is theoretically feasible under current technological conditions
2. Parameter Optimization: Kilogram-scale mass and centimeter-scale separation represent optimal choices
3. Time Scale: Requires approximately one year of observation time (accounting for duty cycle) to achieve statistical significance

Limitations

1. Technical Challenges: Requires breakthrough in cryogenic technology, ultra-high vacuum, and related fields
2. High Cost: Complexity and expense of space missions
3. Theoretical Assumptions: Based on linear quantum gravity assumptions, potentially inapplicable to strong-field regimes

Future Directions

1. Ground-based Verification: Verify critical technologies in ground laboratories
2. Noise Research: Investigate low-temperature, low-frequency stiction effects in depth
3. Systems Engineering: Develop engineering technologies applicable to extreme environments

In-Depth Evaluation

Strengths

1. High Innovation: First proposal of gravity quantization detection scheme based on LISA Pathfinder
2. Rigorous Theory: Establishes comprehensive theoretical framework and simulation model
3. Engineering Feasibility: Based on mature space gravitational wave detection technology
4. Comprehensive Analysis: Systematically considers various noise sources and technical challenges

Weaknesses

1. Technical Risk: Multiple critical technologies remain unverified in space environment
2. Cost Considerations: Insufficient discussion of mission cost and implementation difficulty
3. Theoretical Limitations: Based on specific quantum gravity theory framework
4. Competing Schemes: Insufficient comparison with alternative experimental approaches

Impact

1. Academic Value: Opens new directions for experimental quantum gravity physics
2. Technological Advancement: Promotes development of precision measurement and space technology
3. Theory Verification: May provide critical experimental evidence for quantum gravity theories

Applicable Scenarios

This method is particularly suitable for:

• Quantum gravity verification in fundamental physics research
• Development and application of precision measurement technology
• Technology reserve for space science missions

References

The paper cites 45 important references covering recent research achievements in quantum gravity theory, precision measurement technology, space science, and other fields, providing a solid theoretical foundation for the research.