Instantaneous Polarimetry with Zak-OTFS

Basic Information

• Paper ID: 2508.19185
• Title: Instantaneous Polarimetry with Zak-OTFS
• Authors: Nishant Mehrotra, Sandesh Rao Mattu, Robert Calderbank
• Categories: eess.SP (Signal Processing), cs.IT (Information Theory), math.IT (Information Theory)
• Publication Date: 2025 (arXiv preprint)
• Paper Link: https://arxiv.org/abs/2508.19185
• Affiliated Institution: Duke University, Department of Electrical and Computer Engineering

Abstract

Polarimetry is the capability to measure the scattering response of the environment under orthogonal polarizations, which is crucial for enhancing the performance of wireless communication and radar systems. This paper leverages Zak-OTFS modulation to achieve instantaneous polarimetry within a single transmission frame. By simultaneously transmitting Zak-OTFS carrier waveforms and their corresponding unbiased extended carrier waveforms on orthogonal polarizations, the unbiased property of the two waveforms enables the receiver to estimate the complete polarimetric response of the scattering environment from a single reception frame. Unlike existing instantaneous polarimetry methods with quadratic complexity in time-frequency bandwidth product, the proposed method achieves instantaneous polarimetry with near-linear complexity.

Research Background and Motivation

Problem Definition

Polarimetry is an important technique in radar and wireless communication systems, estimating the 2×2 polarimetric scattering response matrix by transmitting and receiving signals on vertical and horizontal polarizations. Traditional methods face the following key challenges:

1. Limitations of Sequential Polarimetry: Conventional FMCW radar requires two frames to complete polarimetry, leading to increased system latency and reduced Doppler resolution to 2/T
2. Computational Complexity Issues: Existing phase-coded instantaneous polarimetry methods, while capable of single-frame completion, exhibit O(B²T²) computational complexity with quadratic growth in time-frequency bandwidth product
3. Environmental Change Sensitivity: Sequential methods require the scattering environment to remain constant between frames, which is difficult to satisfy in highly dynamic environments

Research Motivation

This paper aims to design a method that can:

• Complete full 2×2 polarimetric scattering response estimation within a single transmission frame
• Reduce computational complexity from O(B²T²) to O(BT log T)
• Provide superior Doppler resolution (1/T) and clutter suppression capability

Core Contributions

1. Proposed a novel instantaneous polarimetry method based on Zak-OTFS: Utilizing Zak-OTFS modulation and generalized discrete affine Fourier transform (GDAFT) to construct unbiased waveform pairs
2. Achieved near-linear computational complexity: Reduced the complexity of polarimetric scattering response estimation from O(B²T²) to O(BT log T)
3. Provided superior system performance: Compared to existing methods, offering better Doppler resolution, stronger clutter suppression capability, and ideal target detection performance
4. Established a complete theoretical framework: Provided mathematical proofs of unbiased property and extensions of crystallization conditions

Methodology Details

Task Definition

Given a P-path polarimetric scattering environment, the polarimetric scattering response of each path p is modeled as a 2×2 matrix:

$H^{(p)} = \begin{bmatrix} h_{HH}^{(p)} & h_{HV}^{(p)} \\ h_{VH}^{(p)} & h_{VV}^{(p)} \end{bmatrix} = C_{RX}\Sigma^{(p)}C_{TX}$

The objective is to estimate all four polarimetric components from a single reception frame.

Model Architecture

Zak-OTFS Fundamentals

Zak-OTFS uses delay-Doppler domain pulses (DD pulsone) as carrier waveforms:

$p_{(k_0,l_0)}[n] = \frac{1}{\sqrt{N}}\sum_{d \in \mathbb{Z}} e^{j\frac{2\pi}{N}dl_0}\delta[n - k_0 - dM]$

where k₀ ∈ Z_M indexes delay positions and l₀ ∈ Z_N indexes Doppler positions.

Generalized Discrete Affine Fourier Transform (GDAFT)

GDAFT transforms pulsones into unbiased extended waveforms:

$\mathcal{F}_a x[n] = \frac{1}{\sqrt{MN}}\sum_{m=0}^{MN-1} e^{j\frac{2\pi}{MN}(An^2+Bnm+Cm^2)}x[m]$

where A, B, C are parameters coprime with MN.

Unbiased Waveform Design

Extended carriers are obtained by GDAFT transformation of pulsones:

• Horizontal Polarization: $x^{(H)}[n] = p_{(k_0,l_0)}[n]$
• Vertical Polarization: $x^{(V)}[n] = c[n] = \mathcal{F}_a p_{(k_0,l_0)}[n]$

The two waveforms satisfy the unbiased property: $A_{c,p_{(k_0,l_0)}}[k,l] = \frac{C_{(k_0,l_0)}[k,l]}{\sqrt{MN}}$

where $|C_{(k_0,l_0)}[k,l]| = 1$.

Polarimetric Channel Estimation

The receiver estimates the polarimetric effective channel by computing cross-ambiguity functions:

$\hat{h}_{eff}^{(j,i)}[k,l] = A_{y^{(j)},x^{(i)}}[k,l] = \sum_{n=0}^{MN-1} y^{(j)}[n](x^{(i)})^*[(n-k)_{MN}]e^{-j\frac{2\pi}{MN}l(n-k)}$

Due to the unbiased property, the estimation result is: $\hat{h}_{eff}^{(j,i)}[k,l] \approx h_{eff}^{(j,i)}[k,l]$

Experimental Setup

Simulation Parameters

• Bandwidth: B = 930 kHz
• Frame Duration: T = 1.2 ms
• Sampling Rate: fs = 2B
• Delay Period: τp = 33.33 μs
• Doppler Period: νp = 30 kHz
• Resolution: M = 31 (delay), N = 37 (Doppler)
• Pulse Shaping: sinc function

Comparison Methods

1. Sequential FMCW Polarimetry: Traditional two-frame method
2. Phase-Coded Instantaneous Polarimetry: Using Zadoff-Chu sequences
3. Single-Polarization System: Using only single polarization

Evaluation Metrics

1. Target Detection: ROC curve analysis
2. Parameter Estimation: RMSE of delay and Doppler estimation
3. Computational Complexity: Cross-ambiguity function computation time
4. Clutter Suppression: Detection performance in constant-γ clutter environment

Experimental Results

Main Results

Computational Complexity Comparison

For frame size M=31, N=37:

• FMCW: 2.4363s (median time)
• Phase-Coded: 2.3445s
• Zak-OTFS: 0.0012s (approximately 2000× improvement)

Target Detection Performance

• Zak-OTFS and phase-coded methods exhibit ideal performance in target detection ROC curves
• FMCW shows significantly degraded performance due to high sidelobes and false targets
• Single-polarization system cannot effectively detect polarimetric targets

Parameter Estimation Accuracy

• Doppler Resolution: Zak-OTFS and phase-coded achieve 1/T, a 2× improvement over FMCW's 2/T
• Delay Estimation: Three dual-polarization methods show comparable performance at high SNR
• Doppler Estimation: Zak-OTFS and phase-coded performance are equivalent, approximately 1.5× improvement over FMCW

Clutter Suppression Experiments

In constant-γ clutter environment with γ = -1.99 dB, Zak-OTFS demonstrates stronger clutter suppression capability compared to phase-coded and FMCW methods.

Multi-Target Detection

In qualitative analysis of four-target environment:

• FMCW produces false targets and fails to detect low-energy targets
• Zak-OTFS and phase-coded methods both achieve ideal detection of all targets

Related Work

Traditional Polarimetry Methods

1. Sequential Polarimetry: Using continuous waveforms such as FMCW transmitted over two frames
2. Instantaneous Polarimetry: Achieving single-frame polarimetry through phase coding

Zak-OTFS Technology

• Novel modulation technique based on delay-Doppler domain
• Exhibits near-linear channel estimation complexity
• Demonstrates superior performance in highly dynamic environments

Conclusions and Discussion

Main Conclusions

1. Complexity Breakthrough: Successfully reduced instantaneous polarimetry complexity from O(B²T²) to O(BT log T)
2. Performance Advantages: Superior to existing methods in target detection, parameter estimation, and clutter suppression
3. System Efficiency: Provides 2× Doppler resolution improvement and significant latency reduction

Limitations

1. Current results are limited to numerical simulation verification, lacking hardware experiments
2. Practical challenges such as peak-to-average power ratio (PAPR) and air synchronization need consideration
3. Theoretical analysis primarily focuses on noise environments with limited analysis of complex clutter scenarios

Future Directions

1. Hardware Verification: Validate algorithm performance in practical radar systems
2. Integrated Sensing and Communication: Extend to 6G integrated sensing and communication applications
3. Theoretical Optimization: Design optimal estimators achieving Cramér-Rao bounds

In-Depth Evaluation

Strengths

1. Technical Innovation: Cleverly combines Zak-OTFS and GDAFT to achieve unbiased waveform design
2. Theoretical Rigor: Provides complete mathematical derivations and complexity analysis
3. Comprehensive Experiments: Covers multiple dimensions including detection, estimation, complexity, and clutter suppression
4. Practical Value: Significant computational complexity improvement holds important engineering significance

Weaknesses

1. Verification Limitations: Only simulation results available, lacking practical hardware verification
2. Parameter Selection: Insufficient guidance on GDAFT parameter selection principles
3. Applicability Range: Adaptability to highly dynamic environments and strong clutter scenarios requires further verification

Impact

This work holds significant importance in polarimetric radar and 6G communication fields, particularly with breakthroughs in computational efficiency and real-time processing, laying foundations for practical applications. The method's generality enables extension to various radar and communication scenarios.

Applicable Scenarios

• Automotive Radar: Autonomous driving systems requiring real-time polarimetry
• Unmanned Aerial Vehicle Detection: Polarimetric feature recognition of small RCS targets
• 6G Communications: Polarimetric diversity and multiplexing in integrated sensing and communication
• Weather Radar: Efficient polarimetry for weather monitoring systems

References

The paper cites 36 relevant references covering key areas including polarimetry, OTFS modulation, and radar signal processing, providing a solid theoretical foundation for the research.