Transfer Learning-Enabled Efficient Raman Pump Tuning under Dynamic Launch Power for C+L Band Transmission

Basic Information

• Paper ID: 2510.09047
• Title: Transfer Learning-Enabled Efficient Raman Pump Tuning under Dynamic Launch Power for C+L Band Transmission
• Authors: Jiaming Liu, Hong Lin, Rui Wang, Jing Zhang, JinJiang Li, Kun Qiu (University of Electronic Science and Technology of China)
• Classification: eess.SP (Signal Processing)
• Publication Date/Conference: 2025 (inferred from references)
• Paper Link: https://arxiv.org/abs/2510.09047

Abstract

This paper proposes a Transformer framework enabled by transfer learning for simultaneous accurate modeling and Raman pump design in C+L band systems. The modeling achieves root mean square error (RMSE) within 0.22 dB, with peak-to-peak GSNR variation and deviation within 0.86 dB and 0.1 dB, respectively.

Research Background and Motivation

1. Problem to be Addressed: With growing bandwidth demands, C+L band transmission systems must address performance non-uniformity caused by stimulated Raman scattering (SRS) effects. SRS transfers power from high to low frequencies, affecting performance consistency across channels and limiting overall capacity enhancement.
2. Problem Significance: Extension to C+L band represents a feasible and cost-effective strategy without replacing existing fiber infrastructure. Raman amplifiers (RA) can provide arbitrary gain distributions with low noise characteristics, making them a key technology for addressing this challenge.
3. Limitations of Existing Methods:
   • Raman amplifier modeling is challenging, involving complex ordinary differential equation systems without analytical solutions
   • Selection of pump wavelengths and power significantly affects gain distribution, ASE noise, and nonlinear interference
   • Existing machine learning methods require dedicated model training for each specific scenario, lacking generalization capability
4. Research Motivation: Develop a universal framework capable of achieving high-precision modeling and efficient optimization under dynamic launch power conditions, improving performance uniformity in C+L band systems.

Core Contributions

1. Proposed a transfer learning-enabled Transformer framework for simultaneous Raman amplifier modeling and pump optimization
2. Designed an encoder-decoder architecture leveraging self-attention mechanisms to improve modeling accuracy, enabling inverse computation without additional optimization algorithms
3. Developed a two-stage transfer learning strategy enabling adaptation to different launch power conditions using only 10% of the original dataset
4. Achieved high-precision performance: RMSE < 0.22 dB in 90% of cases, with post-optimization peak-to-peak GSNR variation < 0.86 dB

Methodology Details

Task Definition

• Input: Raman pump power distribution or target GSNR distribution
• Output: Corresponding GSNR distribution or optimized pump power configuration
• Constraints: Maintain performance uniformity under dynamic launch power conditions

Model Architecture

Overall Framework

The model employs a two-stage training strategy:

1. Forward Modeling Stage: Train the encoder to predict GSNR distribution given pump power
2. Reverse Optimization Stage: Freeze the forward model and train the decoder to generate optimal pump power from target GSNR

Loss Function Design

The reverse model's loss function comprises two components:

$\text{Loss} = \text{MSE}(\text{GSNR}_{\text{input}}, \text{GSNR}_{\text{estimated}}) + \text{MSE}(\text{Power}_{\text{output}}, \text{Power}_{\text{estimated}})$

where MSE is defined as: $\text{MSE} = \frac{1}{N}\sum_{i=1}^{N}(|X_{\text{generated},i} - X_{\text{real},i}|^2)$

Transformer Architecture Details

• Encoder: 2 layers, model dimension $d_{\text{model}} = 32$
• Feed-forward Network: Hidden layer size 128
• Multi-head Attention: 4 attention heads
• Output Processing: Final predictions generated through 2-layer MLP

Transfer Learning Strategy

Two-Stage Transfer Learning

1. Feature Extraction Layer Freezing: Freeze embedding layer, positional encoding, and multi-head attention module parameters
2. Adaptation Layer Fine-tuning: Keep subsequent layers trainable to adapt to new launch power conditions

Model Enhancement

• Introduce LeakyReLU activation functions and additional linear layers in MLP components
• Employ small learning rates for stable knowledge transfer
• Require only 10% of target domain data for fine-tuning

Experimental Setup

Dataset

• Band Configuration: C-band (191.0-197.0 THz) and L-band (184.5-190.5 THz), 50 channels each
• Channel Spacing: 100 GHz, symbol rate 96 GBaud
• Guard Band: 500 GHz guard band between C and L bands
• Fiber Parameters: 80 km ITU-T G.652.D standard single-mode fiber
• Noise Characteristics: C-band NF = 5 dB, L-band NF = 6 dB
• Dataset Scale: 4000 different pump power configurations, 70% training, 30% testing

Raman Pump Configuration

• Number of Pumps: 5
• Pump Wavelengths: 1455, 1469, 1484, 1498, 1514 nm
• Power Range: 0-200 mW uniformly distributed

Training Parameters

• Optimizer: Adam, initial learning rate 1×10⁻³
• Batch Size: 256
• Maximum Epochs: 1000 (early stopping strategy)
• Learning Rate Schedule: ReduceLROnPlateau

Experimental Results

Main Results

Modeling Accuracy

• RMSE Performance: RMSE < 0.22 dB in 90% of cases
• Probability Distribution: Model's high prediction accuracy verified through PDF and CDF

GSNR Optimization Performance

Under different launch power conditions (-4 dBm to 2 dBm):

• Peak-to-Peak Variation: < 0.86 dB (100 channels)
• Average Deviation: < 0.1 dB (relative to target GSNR)
• Spectral Coverage: 10.3 THz C+L band

Transfer Learning Performance

• Data Efficiency: Effective transfer achieved using only 10% of target domain data
• Adaptation Capability: Successfully adapted to 2 dBm and -2 dBm launch power conditions
• Performance Retention: Maintains high-precision modeling and optimization capability post-transfer

Experimental Findings

1. Transformer's self-attention mechanism effectively captures complex mapping relationships between pump power and GSNR
2. Encoder-decoder architecture enables bidirectional modeling without additional optimization algorithms
3. Transfer learning significantly improves model generalization across different launch power conditions

Related Work

Main Research Directions

1. Multi-band Optical Transmission Systems: C+L band extension technologies
2. Raman Amplifier Optimization: Gain flattening and noise optimization
3. Machine Learning Applications: Neural network modeling and optimization algorithms

Advantages of This Work

• Compared to traditional ANN methods, Transformer possesses stronger sequence modeling capability
• Transfer learning strategy significantly improves model adaptability and data efficiency
• End-to-end framework simultaneously addresses modeling and optimization problems

Conclusions and Discussion

Main Conclusions

1. The proposed transfer learning-enabled Transformer framework demonstrates excellent performance in C+L band Raman pump optimization
2. Achieves high-precision modeling (RMSE < 0.22 dB in 90% of cases) and effective optimization
3. Transfer learning strategy enables efficient model adaptation to dynamic launch power conditions

Limitations

1. Experiments conducted only in simulation environment, lacking real system validation
2. Model complexity may limit real-time applications
3. Transfer learning effectiveness depends on source-target domain similarity

Future Directions

1. Validate framework performance in actual optical transmission systems
2. Extend to more bands and complex network topologies
3. Optimize model structure to improve computational efficiency

In-Depth Evaluation

Strengths

1. Technical Innovation: First application of Transformer and transfer learning to Raman amplifier optimization
2. Method Completeness: End-to-end framework addressing both modeling and optimization
3. Experimental Sufficiency: Detailed parameter settings and performance evaluation
4. Practical Value: Significant data efficiency improvement (only 10% data required for transfer)

Weaknesses

1. Validation Limitations: Lack of real system experimental verification
2. Insufficient Comparison: Limited comparison with other advanced machine learning methods
3. Theoretical Analysis: Lack of theoretical explanation for transfer learning effectiveness

Impact

1. Academic Contribution: Introduces new machine learning paradigm to optical communications
2. Practical Value: Provides practical tools for C+L band system optimization
3. Reproducibility: Detailed experimental setup facilitates result reproduction

Applicable Scenarios

• Raman amplifier design in C+L band optical transmission systems
• Amplifier parameter optimization under dynamic network conditions
• Performance uniformity enhancement in multi-band optical networks

References

The paper cites 8 relevant references covering key works in multi-band transmission, Raman amplifiers, and machine learning applications, providing a solid theoretical foundation for the research.

Overall Assessment: This is a technically innovative paper applying advanced machine learning techniques to optical communication system optimization. The methodology design and experimental validation are comprehensive. While lacking real system verification, it provides valuable technical pathways for the field's development.