Mean Curvature Flow Converging to a Minimizing Cone and Its Hardt-Simon Foliation

Basic Information

• Paper ID: 2510.11430
• Title: Mean curvature flow converging to an minimizing cone and its Hardt-Simon foliation
• Author: Jiuzhou Huang
• Classification: math.DG (Differential Geometry)
• Publication Date: October 13, 2025
• Paper Link: https://arxiv.org/abs/2510.11430

Abstract

This paper constructs a family of mean curvature flows that converge to an area-minimizing strictly stable hypercone $C$ under Type I rescaling and to the Hardt-Simon foliation of the cone under Type II rescaling, provided the cone satisfies certain technical conditions. The key distinction from previous results by Velázquez is the removal of symmetry assumptions on the cone.

Research Background and Motivation

Problem Background

1. Singularity Analysis in Mean Curvature Flow: When mean curvature flow develops singularities in finite time, rescaling techniques are employed to study the singularity structure. Singularities are classified into Type I and Type II, with Type II singularities presenting greater analytical challenges.
2. Limitations of Existing Work:
   • Velázquez constructed mean curvature flow solutions with $O(n)×O(n)$ symmetry, converging to the Simons cone under Type I rescaling and to smooth minimal hypersurfaces asymptotic to the Simons cone under Type II rescaling
   • Liu generalized the results to quadratic cones $C_{p,q}$, but still required $O(p)×O(q)$ symmetry
   • These symmetries reduced the problem to ordinary differential equation analysis
3. Motivation of This Work: To investigate the case of asymmetric cones, which requires handling partial differential equations rather than ordinary differential equations, presenting significantly greater technical challenges.

Core Contributions

1. Removal of Symmetry Conditions: First construction of mean curvature flows converging to asymmetric cones, generalizing results of Velázquez and Liu to more general settings
2. Technical Innovations:
   • Development of spectral methods for handling asymmetric cases
   • Construction of novel upper and lower barriers to control flow behavior near the tip region
   • Utilization of strict stability of the Hardt-Simon foliation
3. Theoretical Breakthrough: Proof that under appropriate conditions, one can construct mean curvature flows converging to arbitrary area-minimizing strictly stable hypercones

Detailed Methodology

Problem Formulation

Construct mean curvature flow $\{\Sigma_t\}_{t_0≤t<0}$ satisfying: $F_t = -H\nu$ such that:

• Type I rescaling $\Pi_s = e^{s/2}\Sigma_{-e^{-s}}$ converges to cone $C$
• Type II rescaling $\Gamma_τ = |t|^{-1/2-σ_l}\Sigma_t$ converges to Hardt-Simon foliation $S_{κ,+}$

Core Technical Framework

1. Definition of Admissible Flows

The flow is decomposed into three regions:

• Exterior Region: $\Sigma_t \setminus B(O,\sqrt{|t|})$, parametrized as normal graph over cone $C$
• Intermediate Region: $\Sigma_t \cap (B(O,\sqrt{|t|}) \setminus B(O,β|t|^{1/2+σ_l}))$, using Type I rescaling
• Tip Region: $\Sigma_t \cap B(O,β|t|^{1/2+σ_l})$, using Type II rescaling

2. Spectral Analysis Method

Spectral analysis of the linearized operator $L_C$: $L_C v = \Delta v + |A|^2 v + \frac{1}{2}(v - yv_y)$

Eigenfunctions have the form: $φ_{ij} = y^{α_j}ω_j M(-i; α_j + \frac{n}{2}; \frac{y^2}{4})$

where $M$ is the Kummer function and $α_j$ is determined by: $α_j = \frac{-(n-2) + \sqrt{(n-2)^2 + 4μ_j}}{2}$

3. Degree-Theoretic Construction

Solution construction using topological degree theory:

• Define mapping $Φ(a,t) = e^{λ_l s}(⟨c_1\tilde{v}, φ_1⟩, ..., ⟨c_{l-1}\tilde{v}, φ_{l-1}⟩)$
• Prove degree $\deg(Φ_{t_0}, O_{t_0}, 0) = 1$
• Obtain solution existence via continuity

Technical Innovations

1. Handling Asymmetric Cases:
   • Cannot utilize rotational symmetry to reduce to ODE
   • Requires different parametrizations in different regions
   • Development of estimation techniques applicable to PDE settings
2. Barrier Construction:
   • Utilize rescaled Hardt-Simon foliation to construct upper and lower barriers
   • Employ strict stability to ensure positivity of first eigenvalue
   • Overcome difficulties from lack of global graph representation
3. Coercivity Lemma: Proof that for strictly stable cones, the linearized operator satisfies: $\int_C -(L_C u u)e^{-|Y|^2/4} \geq \tilde{ε}\int_C |\nabla_C u|^2 e^{-|Y|^2/4} - C\int_C u^2 e^{-|Y|^2/4}$

Main Theorems

Theorem 1.1: Let $n≥7$ and $C⊂\mathbb{R}^{n+1}$ be a regular area-minimizing strictly stable hypercone with isolated singularity. If the eigenvalues $λ_l$ of the Jacobi operator $L_C$ satisfy condition (2.13) and constants $α, \tilde{α}$ satisfy condition (4.13), then for $|t_0|≪1$, there exists a mean curvature flow $\{\Sigma_t\}_{t_0≤t<0}$ such that:

1. Type I rescaled hypersurfaces $\{\Pi_s\}$ converge locally smoothly to $C$: $\Pi_s → C \text{ in } C^∞(B(O,R) \setminus B(O,r))$
2. Type II rescaled hypersurfaces $\{\Gamma_τ\}$ converge locally smoothly to $S_{κ,+}$: $\Gamma_τ → S_{κ,+} \text{ in } C^∞_{loc}(S_{κ,+})$

Technical Conditions

Geometric Conditions

• $C$ is area-minimizing: ensures existence of Hardt-Simon foliation
• $C$ is strictly stable: first eigenvalue $μ_1 > -\frac{(n-2)^2}{4}$
• Dimension restriction: $n ≥ 7$

Spectral Conditions

Eigenvalues must satisfy: $λ_{l+1} ≥ λ_l + δ_l$ and complex inequality conditions (4.13) involving relationships between $α$ and $\tilde{α}$.

Estimation Techniques

$C^0$ Estimates

Performed in three regions:

1. Intermediate Region: Spectral methods and Duhamel formula
2. Compact Exterior Region: Upper and lower solution construction, comparison principle
3. Tip Region: Hardt-Simon foliation as barrier
4. Non-compact Exterior Region: Ecker-Huisken gradient and curvature estimates

Higher-Order Estimates

• Maximum principle for gradient control
• Elliptic theory and Schauder estimates for higher regularity
• Geometric measure theory techniques in tip region

Related Work

1. Velázquez (1994): Constructed symmetric mean curvature flows converging to Simons cone
2. Guo-Šešum (2018): Detailed analysis of Velázquez solutions
3. Liu (2024): Generalization to quadratic cones $C_{p,q}$
4. Hardt-Simon (1985): Established foliation theory for minimizing cones
5. Stolarski (2023): Studied singularities with bounded mean curvature

Applications and Significance

Theoretical Significance

1. Singularity Classification Theory: Provides new examples for Type II singularity classification
2. Geometric Analysis: Connects mean curvature flow with minimal surface theory
3. Spectral Theory: Develops spectral analysis techniques on cones

Technical Impact

1. Methodological Breakthrough: Techniques for asymmetric cases applicable to other geometric flows
2. Barrier Methods: Novel barrier construction techniques with universal applicability
3. Degree Theory: Advanced applications in geometric flows

Limitations and Future Directions

Limitations

1. Dimension Restriction: Requires $n ≥ 7$; lower-dimensional cases remain open
2. Technical Conditions: Condition (4.13) is complex, limiting applicability
3. Constructive Nature: Solution construction depends on small parameters, not natural

Future Directions

1. Low-Dimensional Generalization: Investigation of cases with $n < 7$
2. Condition Optimization: Simplification or removal of technical conditions
3. Numerical Implementation: Development of numerical methods to verify theoretical results
4. Other Geometric Flows: Generalization of techniques to Ricci flow and other geometric flows

In-Depth Evaluation

Strengths

1. Major Breakthrough: First treatment of asymmetric cones with extremely high technical difficulty
2. Methodological Innovation: Development of systematic methods for PDE cases
3. Theoretical Completeness: Complete theoretical framework from construction to convergence
4. Technical Depth: Comprehensive application of results from spectral theory, geometric measure theory, and PDE theory

Technical Assessment

1. Rigor: Extremely rigorous proofs with careful technical details
2. Completeness: Comprehensive analysis from existence to regularity
3. Originality: Important innovations in barrier construction and asymmetric treatment

Expected Impact

1. Academic Value: Will become an important milestone in mean curvature flow singularity theory
2. Methodological Value: Technical methods will influence related research areas
3. Follow-up Research: Will generate substantial subsequent work and applications

Applicable Scenarios

1. Geometric Analysis: Study of singularity structures in other geometric flows
2. Minimal Surface Theory: Analysis of complex minimal surface constructions
3. Mathematical Physics: Applications in related physical models

This paper represents a major advance in mean curvature flow singularity theory. By removing symmetry assumptions, it significantly generalizes existing results, and its technical innovations will have profound impact on the field of geometric analysis.