Intense and Tunable Multi-color Terahertz Radiation from Laser-Shaped Electron Beams

Basic Information

• Paper ID: 2510.12426
• Title: Intense and Tunable Multi-color Terahertz Radiation from Laser-Shaped Electron Beams
• Authors: Yin Kang, Weiyi Yin, Xianzhe Li, Yixuan Liu, Yue Wang, Yuan Ma, Kaiqing Zhang, Chao Feng
• Classification: physics.acc-ph (Accelerator Physics)
• Institutions: Shanghai Advanced Research Institute of CAS, University of Chinese Academy of Sciences, Zhangjiang Laboratory, Shanghai Institute of Applied Physics of CAS
• Paper Link: https://arxiv.org/abs/2510.12426

Abstract

High-power multi-color terahertz (THz) radiation demonstrates extraordinary application prospects across various scientific frontiers due to its capability to simultaneously provide terahertz excitations at multiple frequencies. However, existing technologies still face challenges in generating high-power multi-color terahertz radiation with tunable frequencies. This paper proposes a technique combining multi-laser pulse frequency beating and coherent undulator amplification for generating tunable high-power multi-color terahertz radiation. Numerical simulations demonstrate that this technique can produce 3-6 different colors of multi-color terahertz radiation with peak powers reaching hundreds of megawatts. Additionally, by employing undulators with different resonances, time-separated dual-color pulses can be generated.

Research Background and Motivation

Importance of the Problem

1. Scientific Application Prospects: Multi-color terahertz radiation possesses unique value in low-energy excitation research, with photon energies well-matched to lattice vibrations, spin waves, and internal excitations of electron-hole pairs
2. Frontier Application Demands: Important applications in coherent manipulation of atomic/molecular multi-level systems, terahertz tomography, differential terahertz absorption lidar, and molecular fingerprinting
3. Emerging Technologies: Terahertz pump-terahertz probe (TPTP) technology based on time-separated dual-color pulses enables exploration of ultrafast dynamics in materials

Limitations of Existing Methods

Existing multi-color terahertz sources primarily include:

• Quantum Cascade Lasers (QCL): Relatively low power output
• Photoconductive Antennas: Limited frequency tuning capability
• Optical Parametric Oscillators: Difficult spectral structure control
• Femtosecond Laser-based Difference Frequency Generation: Insufficient peak power

Research Motivation

Free-electron lasers (FEL) based on undulator radiation have become a reliable technology for generating high-power, narrow-band, continuously tunable radiation from terahertz to X-ray wavelengths. Multi-color FEL has been successfully demonstrated in the X-ray domain, but efficient multi-color radiation generation in the terahertz regime remains a major challenge.

Core Contributions

1. Proposes Innovative Technical Scheme: Combines multi-laser pulse frequency beating and coherent undulator amplification to achieve high-power multi-color terahertz radiation generation
2. Achieves High-Power Output: Numerical simulations show generation of multi-color terahertz radiation with peak powers reaching hundreds of megawatts
3. Flexible Frequency Control: Enables effective control of terahertz frequency, number of colors, and frequency spacing through simple adjustment of beating laser parameters
4. Multiple Operating Modes: Can produce both simultaneous 3-6 color radiation and time-separated dual-color pulses for TPTP experiments
5. Opens Pathways for Scientific Applications: Provides technical foundation for advanced terahertz applications including atomic multi-level excitation and molecular fingerprinting

Methodology Details

Task Definition

Generation of multi-color terahertz radiation with the following characteristics:

• Input: Electron beam and multi-pulse frequency beating seed laser
• Output: High-power, multi-color, frequency-tunable terahertz radiation
• Constraints: Frequency spacing must satisfy undulator gain bandwidth limitations

System Architecture

1. Overall Layout

The system comprises the following key components:

• Electron gun generating 1.67 ps (RMS) electron bunches
• Linear accelerator accelerating electron beam to 120 MeV
• Modulator: electron beam interaction with multi-pulse frequency beating seed laser
• Dispersive section (chicane): converts energy modulation to density modulation
• Undulator: generates multi-color terahertz radiation

2. Seed Laser System

Multi-pulse Frequency Beating Laser Generation:

• Initial laser: center wavelength 800 nm, pulse width 35 fs, peak power 48 MW
• Grating pair expansion: stretches pulse to 3.92 ps and introduces linear chirp
• Optical beam splitting: divides into m branches
• Time delay: introduces different time delays between branches
• Optical beam combining: recombines to produce multi-pulse beating laser

Key Formulas:

• Initial electric field: $E_{in}(t) = A_0 \exp(-\frac{t^2}{\sigma_0^2} + i\omega_0 t)$
• Stretched electric field: $E_{out}(t) = A_0(\frac{\sigma_0}{\sigma_{out}})^{1/2}\exp(-\frac{t^2}{\sigma_{out}^2})\exp[i(\omega_0 t + \alpha t^2)]$
• Beating frequency: $f_n = \frac{\alpha \tau_{i,j}}{\pi}$

3. Electron Beam Modulation Process

Energy Modulation: Dimensionless energy deviation of electron beam after modulator: $\eta = \eta_0 + A\{\cos(\omega_0 t + \alpha t^2) + \cos[\omega_0(t + \tau_{12}) + \alpha(t + \tau_{12})^2] + ...\}$

Density Modulation: Through dispersive section conversion, electron longitudinal position becomes: $s = s_0 + R_{56}\eta\frac{\sigma_\gamma}{c\gamma_0}$

Technical Innovations

1. Multi-frequency Simultaneous Modulation: Utilizes multi-pulse beating laser to achieve simultaneous multi-frequency modulation in a single modulator
2. Flexible Frequency Control: Enables continuous frequency tuning through adjustment of time delays between laser branches
3. Overcoming Gain Bandwidth Limitations: For time-separated dual-color pulses, employs different longitudinal position modulation and independent amplification
4. Coherent Amplification: Leverages pre-bunched electron beam for coherent amplification in the undulator

Experimental Setup

Main Parameters

Simulation Tools

Three-dimensional numerical simulations performed using FALCON and GENESIS codes

Evaluation Metrics

• Peak power
• Bunching factor
• Spectral structure
• Frequency spacing
• Radiation bandwidth

Experimental Results

Main Results

1. Three-Color Terahertz Radiation

• Peak Power: 0.58 GW (at 7.6 m)
• Maximum Bunching Factor: 0.85
• Frequency Components: 18.74 THz, 20.05 THz, 21.46 THz
• Frequency Tuning: Continuous tuning achieved through adjustment of laser branch delays

2. Six-Color Terahertz Radiation

• Peak Power: 0.43 GW (at 5 m)
• Frequency Components: 17.24, 18.04, 18.94, 20.05, 21.16, 22.36 THz
• Characteristics: Demonstrates richer spectral structure

3. Time-Separated Dual-Color Pulses

• 30 THz Radiation: Peak power 0.24 GW, bandwidth 0.11 μm
• 20 THz Radiation: Peak power 0.52 GW, bandwidth 0.2 μm
• Time Delay: Tunable range from hundreds of femtoseconds to several picoseconds

Technical Limitations Analysis

Frequency spacing must satisfy the condition: $\frac{\lambda}{nN} < l_{mode} < \frac{6\lambda\sqrt{3\sqrt{3}\rho}}{k_u z}$

where the left side represents the undulator natural linewidth limitation and the right side represents the gain bandwidth limitation.

Related Work

Comparison with Traditional Terahertz Sources

1. QCL: Power limited to mW-W level
2. Photoconductive Antennas: Limited frequency tuning range
3. Parametric Methods: Difficult spectral structure control
4. Difference Frequency Generation: Lower conversion efficiency

Experience from X-ray Multi-color FEL

• Successfully demonstrated at facilities such as LCLS and SACLA
• Promoted development of advanced experimental techniques including RIXS and XPP
• Provides technical reference for terahertz domain

Terahertz FEL Development

• Traditional methods based on low-gain FEL with limited power and tunability
• The proposed method significantly improves performance metrics

Conclusions and Discussion

Main Conclusions

1. Technical Feasibility: Successfully demonstrates a novel technique for generating high-power multi-color terahertz radiation
2. Performance Advantages: Peak power reaches hundreds of megawatts level, far exceeding existing technologies
3. Flexible Control: Frequency, number of colors, and spacing can be precisely controlled through laser adjustment
4. Application Prospects: Provides powerful tool for TPTP experiments and multi-level system research

Limitations

1. Gain Bandwidth Constraints: Frequency spacing limited by undulator gain bandwidth
2. Complexity: Requires precise laser timing control and high-quality electron beam
3. Equipment Requirements: Demands high-quality electron beam and advanced laser systems

Future Directions

1. Parameter Optimization: Further optimize electron beam and laser parameters to enhance performance
2. Frequency Extension: Explore multi-color radiation generation over wider frequency ranges
3. Experimental Verification: Validate theoretical predictions on actual facilities
4. Application Development: Conduct specific scientific application experiments

In-Depth Evaluation

Strengths

1. Strong Innovation: First proposal combining multi-laser pulse frequency beating with coherent undulator amplification
2. Advanced Technology: Achieves unprecedented multi-color high-power radiation in terahertz domain
3. High Practical Value: Provides critical technological tools for multiple frontier scientific fields
4. Complete Theory: Provides comprehensive theoretical analysis and numerical verification

Weaknesses

1. Lack of Experimental Verification: Currently only numerical simulation results available, lacking experimental validation
2. Cost Considerations: Insufficient discussion of system complexity and construction costs
3. Stability Analysis: Insufficient analysis of system stability and fault tolerance

Impact

1. Academic Contribution: Makes important contribution to terahertz science and FEL technology development
2. Technology Advancement: May promote development of next-generation terahertz light sources
3. Application Value: Provides new tools for materials science, biomedical fields, and other domains

Applicable Scenarios

1. Basic Research: Atomic/molecular physics and condensed matter physics research
2. Materials Science: Ultrafast dynamics process investigation
3. Biomedical Applications: Molecular fingerprinting and imaging
4. Industrial Applications: Non-destructive testing and quality control

References

The paper includes 64 references covering important works in terahertz science, free-electron lasers, ultrafast optics, and related fields, providing solid theoretical foundation and technical background for the research.

Summary: This paper proposes an innovative technique for generating high-power multi-color terahertz radiation by ingeniously combining multi-laser pulse frequency beating and coherent undulator amplification, achieving unprecedented performance metrics. The technique is not only theoretically significant but also opens new possibilities for numerous frontier applications in terahertz science.