Low-Power Temperature Control by Chiral Ferroelectric Nematic Liquid Crystal Windows

Basic Information

• Paper ID: 2510.14091
• Title: Low-Power Temperature Control by Chiral Ferroelectric Nematic Liquid Crystal Windows
• Authors: Md Sakhawat Hossain Himel, Rohan Dharmarathna, Netra Prasad Dhakal, Kelum Perera, S. Sprunt, J.T. Gleeson, Robert J. Twieg, Antal Jákli
• Classification: cond-mat.soft physics.app-ph
• Institution: Kent State University (Materials Sciences Graduate Program, Advanced Materials and Liquid Crystal Institute, Department of Physics, Department of Chemistry and Biochemistry)
• Paper Link: https://arxiv.org/abs/2510.14091

Abstract

Low power consumption is critical for smart windows used in temperature control and privacy protection applications. Recently discovered ferroelectric nematic liquid crystals exhibit strong coupling between ferroelectric polarization and electric fields, making them promising candidates for energy-efficient electrochromic devices. This study investigates the electrochromic properties of room-temperature chiral ferroelectric nematic liquid crystals in in-plane electrode thin films, where the electric field is perpendicular to the helical axis. The research demonstrates that smart windows based on this material can regulate indoor temperature within a 10°C range using only 50 mW/m² specific power consumption, achieving 50% greater temperature modulation than polymer-dispersed and polymer-stabilized liquid crystal windows with 50-100 times lower power consumption. These findings indicate that chiral ferroelectric nematic liquid crystals provide an efficient approach for smart window applications, with promising potential to surpass existing electrochromic technologies in energy efficiency and thermal regulation.

Research Background and Motivation

Problem Definition

Traditional smart window technologies face the challenge of excessive power consumption, which limits their widespread application in building energy conservation. Existing electrochromic liquid crystal technologies, including polymer-dispersed liquid crystals (PDLC), polymer-stabilized liquid crystals (PSLC), and dye-doped liquid crystals, offer rapid response but still consume significant power.

Research Significance

Smart windows can dynamically control light transmission and improve thermal performance by reducing internal heat gain and reflecting unwanted radiation, thereby enhancing energy efficiency and cost-effectiveness. Developing low-power smart window technology is crucial for building energy conservation.

Limitations of Existing Technologies

1. PDLC windows: Require 30-60V voltage with power consumption of 5-20 W/m², opaque state obstructs vision
2. PSLC windows: Require 10-40V voltage with power consumption of 2-4 W/m², suffer from long-term stability issues
3. Dye-doped liquid crystals: Heat generation from light absorption reduces cooling efficiency

Research Motivation

Recently discovered ferroelectric nematic (N_F) liquid crystals are extremely sensitive to electric fields. Chiral ferroelectric nematic (N*_F) materials exhibit wavelength-tunable reflectance across the visible spectrum, with reflectance reversibly tunable over approximately 150 nm wavelength range under small electric fields.

Core Contributions

1. First demonstration of ultra-low-power smart window technology based on chiral ferroelectric nematic liquid crystals with power consumption of only 50 mW/m²
2. Achievement of 10°C temperature regulation range, 50% greater than PDLC and PSLC windows
3. Demonstration that stacking left-handed and right-handed helical N*_F films increases reflectance to 70%
4. Establishment of theoretical power consumption analysis model for in-plane electrode geometry
5. Provision of a novel temperature control mechanism based on electrically-controlled reflection rather than scattering or absorption

Methodology Details

Material System

The core material used in the research is the KPA-02 mixture, comprising:

• 60 wt% single-component ferroelectric nematic liquid crystal compound RT12155
• 40 wt% commercial nematic liquid crystal HTG-135200-100
• 3.2 wt% chiral dopant R-5011 or S-5011

Device Structure Design

In-Plane Electrode Geometry

• Electrode design: 100 μm wide interdigitated in-plane ITO electrodes with 1 mm spacing
• Film thickness: 30 μm
• Substrate treatment: Polyimide (PI 2555) coating with unidirectional rubbing alignment

Stacked Structure

Vertical stacking of right-handed N_F (R) and left-handed N_F (S) films doubles reflectance, increasing from ~33% for single layer to ~70%.

Operating Principle

Electric Field Modulation Mechanism

Under in-plane electric field, the helical structure of N*_F material undergoes distortion while pitch remains constant, resulting in decreased reflectance with unchanged reflection wavelength. This differs from conventional liquid crystal reorientation mechanisms.

Power Consumption Advantage Analysis

The resistance of in-plane electrode geometry is: R_ip = ρ·L²/(d·A) While sandwich structure resistance is: R_s = ρ·d/A where L is electrode spacing, d is film thickness, and A is window area.

Power density comparison:

• In-plane structure: P/A = V²d/(ρL²)
• Sandwich structure: P/A = V²/(ρd)

Experimental Setup

Material Preparation

1. N*_F samples: KPA-02 + 3.2% R-5011/S-5011, capillary filled to 30 μm thickness
2. PSLC control: HTG-135200-100 + 5% RM257 + 1.5% Irgacure 651, UV-cured
3. PDLC control: 45% E7 + 55% NO65, UV-cured

Testing Apparatus

A custom-built thermally insulated box simulating a room with an open front covered by liquid crystal window, illuminated by xenon lamp (40 mW/cm²) simulating sunlight, with thermistor monitoring internal temperature.

Measurement Methods

• Reflectance measurement: OceanOptics VIS-IR spectrophotometer
• Electric field application: HP 33120A function generator + FLC F20AD voltage amplifier
• Resistance measurement: Keithly 6517B electrometer

Experimental Results

Optical Performance

• Reflection wavelength: 430-440 nm (blue)
• Maximum reflectance: ~33% for single layer, ~70% for bilayer stack
• Electric field response: Reflectance drops to single-digit percentages under 0.14 V/μm, 100 Hz sinusoidal electric field
• Response time: <1 second for field changes, complete recovery <1 minute

Temperature Control Performance

Zero-Field Temperature (Reflective State)

• N*_F(R+S): 25°C
• N*_F(R): 26.5°C
• PSLC/PDLC: 28°C

Transparent State Temperature

• N*_F(R): 32.5°C
• PSLC: 33.5°C
• N*_F(R+S): 36°C
• PDLC: 36°C

Temperature Regulation Range

• N*_F(R+S): ΔT ≈ 10°C
• N*_F(R): ΔT ≈ 7°C
• PDLC: ΔT ≈ 8°C
• PSLC: ΔT ≈ 5.5°C

Power Consumption Comparison

Related Work

Smart Window Technology Classification

1. Electrochromic windows: Use electrical signals to modulate color/opacity
2. Thermochromic windows: Based on temperature-dependent optical properties (e.g., VO₂)
3. Photochromic windows: Use organic dyes or metal oxide particles

Liquid Crystal-Based Smart Windows

• PDLC: Liquid crystal droplets dispersed in polymer matrix, scattering-transparent switching
• PSLC: Polymer network in liquid crystal matrix, normal/reverse mode
• Dye-doped: Absorption change through molecular reorientation

Ferroelectric Nematic Liquid Crystals

N*_F liquid crystals are a recently discovered phase state exhibiting extreme electric field sensitivity, with demonstrated applications in high-speed electro-optic modulators, microlenses, and photovoltaic devices.

Conclusions and Discussion

Main Conclusions

1. Chiral ferroelectric nematic liquid crystal smart windows achieve ultra-low-power temperature control (50 mW/m²)
2. Temperature regulation range reaches 10°C, representing 50% improvement over conventional technologies
3. Power consumption reduced by 40 times compared to PDLC and 200 times compared to PSLC
4. Electric-controlled reflection mechanism avoids drawbacks of scattering and absorption

Technical Advantages

• Ultra-low power consumption: Enabled by in-plane electrode geometry and high electric field sensitivity of N*_F material
• Wide temperature regulation range: Bilayer stacking structure achieves higher reflectance
• Fast response: Second-level response time meets practical requirements
• Clear vision: Both states maintain transparency without obstructing view

Limitations

1. Voltage requirements: In-plane electrodes require higher voltage (140V vs 60V), but can be addressed by reducing electrode spacing
2. Material stability: Long-term stability requires further verification
3. Fabrication complexity: In-plane electrode photolithography is more complex than sandwich structure
4. Wavelength limitation: Currently operates primarily in blue light spectrum, requires extension to broader spectral range

Future Directions

1. Multi-layer stacking: Use N*_F materials with different pitches to achieve broader wavelength reflection range
2. Electrode optimization: Develop interdigitated electrodes with smaller spacing to reduce operating voltage
3. Material improvement: Increase resistivity of N*_F materials to further reduce power consumption
4. Practical implementation: Develop large-area fabrication techniques suitable for building applications

In-Depth Evaluation

Strengths

1. Major technological breakthrough: First demonstration of mW-level power consumption smart windows, reducing power by 1-2 orders of magnitude compared to existing technologies
2. Clear mechanism: Electric-controlled reflection working principle avoids inherent defects of conventional technologies
3. Comprehensive experiments: Systematic comparison of multiple technologies provides complete performance assessment
4. Theoretical analysis: Provides quantitative theoretical explanation for power consumption differences
5. Application prospects: Significant application value in building energy conservation field

Limitations

1. Material constraints: Dependent on specific N*_F material system with limited material selection options
2. Fabrication complexity: In-plane electrode fabrication requires photolithography, increasing manufacturing costs
3. Spectral range: Primarily operates in blue light spectrum, limiting full-spectrum control effectiveness
4. Long-term stability: Lacks long-term operational stability data

Impact

1. Academic value: Provides novel technological pathway for smart window field
2. Industrial prospects: Ultra-low-power characteristics provide competitive advantage in commercial applications
3. Technology advancement: May promote further development of ferroelectric nematic liquid crystal materials
4. Energy conservation significance: Important implications for building energy conservation and smart building applications

Applicable Scenarios

1. Building exterior windows: Suitable for building windows requiring dynamic thermal control
2. Automotive sunroofs: Vehicle applications with low-power requirements
3. Greenhouse systems: Smart temperature control systems for agricultural greenhouses
4. Solar buildings: Smart buildings integrated with solar energy systems

References

The paper cites 76 relevant references covering multiple fields including smart windows, liquid crystal technology, and ferroelectric nematic liquid crystals, providing solid theoretical foundation and technical background for this research.

Summary: This research achieves significant breakthrough in smart window technology. Through innovative chiral ferroelectric nematic liquid crystal materials and in-plane electrode design, it reduces power consumption by 1-2 orders of magnitude while maintaining excellent temperature regulation performance. This technology is expected to have important impact in building energy conservation field, representing a new direction in smart window technology development.