We propose a robust demodulation scheme for optical camera communication systems using an event-based vision sensor, combining OOK with toggle demodulation and a digital phase-locked loop. This is the first report to achieve a $\mathrm{BER} < 10^{-3}$ at 200m-60kbps and 400m-30kbps in outdoor experiments.
- Paper ID: 2510.14266
- Title: Experimental Demonstration of Event-based Optical Camera Communication in Long-Range Outdoor Environment
- Authors: Miu Sumino, Mayu Ishii, Shun Kaizu, Daisuke Hisano, Yu Nakayama
- Classification: cs.CV (Computer Vision)
- Publication Date: October 16, 2025 (arXiv preprint)
- Paper Link: https://arxiv.org/abs/2510.14266v1
This paper proposes a robust demodulation scheme for optical camera communication systems based on event-based vision sensors, combining on-off keying (OOK), triggered demodulation, and digital phase-locked loop (DPLL) techniques. This is the first reported study achieving 60 kbps transmission at 200 meters and 30 kbps at 400 meters in outdoor experiments with bit error rate (BER) < 10^-3.
Optical camera communication (OCC) is a form of visible light communication (VLC) that uses CMOS sensor-based cameras as receivers to capture modulated optical signals from light sources such as LEDs, panels, and displays. Traditional OCC systems face the following key challenges:
- Frame Rate Limitations: Conventional frame-based cameras are constrained by frame rate, limiting achievable throughput
- Computational Resource Consumption: Real-time processing of large volumes of image data requires substantial computational resources
- Insufficient Long-Distance Transmission Capability: Existing methods show limited performance in long-distance outdoor environments
OCC technology has important application value:
- Operates in the visible light spectrum without overlapping with RF bands such as Wi-Fi or Bluetooth
- Produces no electromagnetic interference, suitable for environments restricting RF usage such as aircraft cabins and medical facilities
- Enables dual functionality of illumination and communication
As shown in the benchmark in Figure 1b, existing event-driven OCC systems exhibit the following limitations:
- Prominent trade-off between transmission distance and data rate
- Poor performance in outdoor long-distance environments
- High BER of 10^-2 for high data rate systems (>100 kbps), limiting practical applicability
- Proposed Novel Demodulation Scheme: A new method combining OOK modulation with triggered demodulation, coupled with digital phase-locked loop (DPLL) to compensate for burst errors
- Optimized EVS Frequency Response: Optimized frequency response characteristics of event-based vision sensors for transmitted optical pulse frequencies
- Achieved Record Performance: Attained record transmission performance in outdoor experiments: 200m-60kbps, 400m-30kbps, BER < 10^-3
- Low-Cost Implementation: Used low-cost microcontrollers such as Arduino and M5Stack to drive LED transmitters, with DPLL at the receiver effectively mitigating timing jitter effects
This paper investigates long-distance outdoor optical camera communication based on event-based vision sensors:
- Input: Modulated optical signals from LED transmitters
- Output: Recovered digital bit sequences
- Constraints: Outdoor environment, long-distance transmission, low BER requirements
The EVS pixel architecture includes:
- Photoelectric Conversion: Incident light converted to analog voltage through photodiodes
- Signal Processing: Shaped temporal response through adjustable filters (low-pass or high-pass)
- Change Detection: Brightness changes detected by differential circuits
- Event Generation: Pulse events generated when changes exceed predefined contrast thresholds
Key adjustable parameters include:
- Filter bandwidth
- Refractory period
- Contrast sensitivity
- Transmitter: Transmits continuous non-return-to-zero (NRZ) OOK signals with 8b/10b line coding for reliable clock extraction
- Receiver: EVS detects light intensity changes, outputting positive and negative events
- State Retention: Positive events serve as set pulses, negative events as reset pulses, implementing a trigger-like state retention mechanism
Addresses timing jitter between asynchronous events causing detection misses:
- Detects clock errors
- Compensates for burst errors
- Improves demodulation stability
- Event Aggregation: Aggregates events from relevant pixels
- Smoothing Filtering: Eliminates noise and interference
- Peak Detection: Extracts event peaks
- Symbol Decision: Recovers bit sequences based on triggered demodulation
- Transmitter:
- M5Stack microcontroller
- White surface-mount LED (brightness 26.5 lm)
- Receiver:
- Sony IMX636 event-based vision sensor (0.92 megapixels)
- RICOH FA lens (75mm focal length, F1.8 aperture)
- Location: Koganei Campus, Tokyo University of Agriculture and Technology
- Conditions: Outdoor daytime environment with shadows and intermittent cloud coverage
- Illuminance: At least 10 klux
- Distances: 200m, 300m, 400m
- Data Volume: 8 kbit random code with 8b/10b encoding
- Repetitions: At least 100 transmissions per distance, totaling 10 kbit code
- Frequency Range: 10 kHz to 100 kHz
- Primary Metric: Bit error rate (BER)
- Performance Standard: BER < 10^-3 (within 7% hard-decision forward error correction limit)
| Distance | Maximum Data Rate | Net Data Rate* | BER |
|---|
| 200m | 60 kbps | 44.6 kbps | < 10^-3 |
| 300m | 50 kbps | 37.2 kbps | < 10^-3 |
| 400m | 20 kbps | 14.9 kbps | < 10^-3 |
*Net data rate accounts for 8b/10b encoding overhead and 7% HD-FEC loss
Figure 4 shows frequency response after parameter tuning:
- Significant increase in event generation rates for positive and negative signals in high-frequency bands above 10 kHz
- Compared to initial settings, optimized system shows marked performance improvement in target frequency ranges
Comparison of experimental results with and without DPLL (Figures 6-8):
- BER significantly reduced with DPLL across all transmission distances
- Demonstrates DPLL effectively improves demodulation stability
- At identical BER requirements, DPLL significantly expands usable data rate ranges
Advantages over existing methods:
- Transmission Distance: 400m vs. previous best of approximately 100m
- Data Rate: Maintains relatively high rates even at long distances
- Bit Error Rate: Achieves better distance-rate trade-off under practical BER requirements
Early frame-camera-based OCC systems employed:
- Undersampled modulation schemes
- Multi-level intensity modulation
- Rolling shutter techniques
Primary limitations: Frame rate constraints, high computational complexity
Existing event-driven OCC research:
- Z. Wang (2022): Indoor/outdoor short-distance transmission using OOK modulation
- W.-H. Shen (2018): Vehicular applications using PPM modulation
- Multi-channel Systems: While achieving >100kbps, BER reaches 10^-2
Advantages of this work over existing research:
- Longer transmission distances
- Lower bit error rates
- Practical system design
- Technical Feasibility: Demonstrates feasibility of long-distance outdoor OCC systems based on EVS
- Performance Breakthrough: Exceeds existing methods in both distance and data rate
- Cost-Effectiveness: Achieves stable communication using low-cost microcontrollers
- Practical Value: Meets practical BER requirements, establishing foundation for real-world applications
- Offline Processing: Current receiver employs offline signal processing, requiring real-time improvements
- Environmental Dependence: Experiments conducted under specific outdoor conditions, requiring validation across more environments
- Hardware Cost: EVS sensor costs remain higher than traditional cameras
- System Complexity: DPLL and parameter optimization increase system complexity
Development directions explicitly proposed in the paper:
- Real-Time Implementation: Develop real-time signal processing algorithms and hardware implementations
- Environmental Adaptability: Test performance across more environmental conditions
- System Optimization: Further optimize parameters to enhance performance
- Application Expansion: Explore specific application scenarios
- Strong Innovation: First application combining triggered demodulation with DPLL in event-driven OCC
- Comprehensive Experiments: Systematic experimental validation in real outdoor environments
- Outstanding Performance: Significant improvements across multiple key metrics
- Practical Orientation: Considers cost and implementation complexity with practical value
- Solid Technical Foundation: Complete technical chain from theoretical analysis to experimental verification
- Insufficient Theoretical Analysis: Lacks theoretical analysis of system performance limits
- Limited Environmental Adaptability: Verified only under specific environmental conditions
- Absence of Real-Time Implementation: Does not achieve true real-time system operation
- Incomplete Comparisons: Insufficient comparative analysis with traditional RF communication systems
- Academic Value: Provides important reference for event-driven optical communication field
- Technical Advancement: Promotes development of EVS in communication applications
- Practical Prospects: Provides solution for RF-interference-free communication needs
- Reproducibility: Clear experimental setup with good reproducibility
- Special Environment Communication: Medical facilities, aircraft cabins and other RF-restricted locations
- Internet of Things Applications: Integration of smart lighting with data transmission
- Vehicular Communication: Vehicle light-to-light communication systems
- Industrial Applications: Industrial scenarios requiring long-distance visible light communication
The paper cites 17 related references, primarily covering:
- OCC system design and implementation research
- Event-based vision sensor technology
- Visible light communication applications
- Vehicular and underwater VLC systems
Key references include Z. Wang et al.'s event-driven OCC work and related VLC survey literature, providing important foundation for this research.
Overall Assessment: This is a high-quality paper with significant contributions to the event-driven optical camera communication field, demonstrating excellence in technical innovation, experimental verification, and practical value, providing important impetus for field development.