Algol is a well-known eclipsing binary hosting an active and variable star that exhibits frequent stellar flares. Here, we report our pre-planned and coordinated rapid X-ray follow-up observations of an eclipsing flare on Algol. The Monitor of All-sky X-ray Image (MAXI) detected a flare on Algol at 05:52 UT on 2018 July 4. Subsequently, we carried out a prompt X-ray monitoring with the Neutron star Interior Composition Explorer (NICER) starting at 19:45 UT on the same day, and the observation ended at 06:02 UT on 2018 July 6. During the decaying phase of the flare, we successfully detected a 5.8-hour-long eclipse, corresponding to the secondary eclipse in which Algol A blocks the line of sight to Algol B. During the eclipse, the 2--10 keV X-ray flux is decreased to 20\% level from $1.9\times10^{-10}~ \mathrm{erg~cm^{-2}~s^{-1} }$ to $4.5\times10^{-11}~ \mathrm{erg~cm^{-2}~s^{-1} }$. We found a configuration of the flare size and location to explain the X-ray observations; e.g., the flare occurred at the latitude 45°S of the Algol B surface with a flare height of $1.9\times10^{11}~\mathrm{cm}$, corresponding to 0.8 times the stellar radius of Algol B, giving 80% obscuration of the flare loop by Algol A. The apparent absorption increase before the eclipse might originate from coronal mass ejection (CME) in the line of sight ejected during the flare.
- Paper ID: 2510.14587
- Title: Eclipsing Stellar Flare on the Demon Star Algol Binary System Observed during the MAXI-NICER Follow-up Campaign in 2018
- Authors: Kazuya Nakayama, Wataru Buz Iwakiri, Teruaki Enoto, Shun Inoue, Yuta Notsu, Keith Gendreau, Zaven Arzoumanian, Kenji Hamaguchi, Tatehiro Mihara
- Classification: astro-ph.SR (Solar and Stellar Astrophysics), astro-ph.HE (High Energy Astrophysics)
- Publication Date: Draft version dated October 17, 2025
- Paper Link: https://arxiv.org/abs/2510.14587
This paper reports a coordinated observational study of X-ray flares occurring on the famous eclipsing binary system Algol (β Persei). On July 4, 2018, the All-Sky X-ray Monitor (MAXI) detected a flare on Algol, followed by rapid follow-up observations by NICER. During the flare decay phase, the research team successfully observed a 5.8-hour eclipse corresponding to the secondary eclipse where Algol A occludes Algol B. The 2-10 keV X-ray flux decreased from 1.9×10⁻¹⁰ erg cm⁻² s⁻¹ to 4.5×10⁻¹¹ erg cm⁻² s⁻¹ during eclipse, representing an 80% decrease. The study determined that the flare occurred at a southern latitude of 45° on the surface of Algol B, at a height of 1.9×10¹¹ cm (approximately 0.8 times the radius of Algol B).
Stellar flares are phenomena of sudden brightness increase caused by rapid release of magnetic energy in stars, analogous to solar flares. However, since stellar flares cannot be spatially resolved through X-ray imaging observations, it is difficult to obtain information about flare size and location, which limits research into flare emission mechanisms and physical processes.
- Unique Observational Opportunity: Eclipsing binary systems provide unique geometric advantages for studying stellar flares; spatial information about flares can be inferred by analyzing X-ray light curves during eclipse
- Theoretical Verification: Verifying whether stellar flares follow the same standard model as solar flares
- Technical Breakthrough: Utilizing the rapid-response capabilities of modern time-domain astronomy for coordinated observations
- Historically, only two eclipsing flare events on Algol have been observed (1997 and 2002), both discovered by chance
- Lack of pre-planned rapid follow-up observations
- Limited understanding of flare spatial structure
- First Pre-planned Eclipsing Flare Observation: Successfully achieved rapid follow-up observations of Algol flares through the MAXI-NICER coordinated observation system (MANGA)
- Precise Flare Parameter Determination: Determined the flare location (southern latitude 45°), height (0.8 R_B), and occultation degree (80%)
- Multi-method Verification: Combined eclipse geometry and X-ray spectroscopy as two independent methods to verify consistency of flare parameters
- CME Evidence: Discovered observational evidence for possible coronal mass ejection (CME)
- Largest-scale Eclipsing Flare: Recorded one of the largest eclipsing X-ray flare events observed to date
MANGA System: MAXI and NICER ground alert system enabling rapid response from flare detection to follow-up observation (within 1-27 hours)
- MAXI Observation: Flare detected on July 4, 2018 at 05:52 UT with flux ~300 mCrab
- NICER Follow-up: Observations began at 19:45 UT and continued for 34 hours until July 6 at 06:02 UT
- Data Processing: Standard calibration and filtering using HEASoft v6.33.2 and CALDB xti20240206
Precise orbital phase determined using O-C correction:
- Reference epoch: JD 2440953.4657 + 2.8673075 E
- O-C correction: 0.12 days
- Eclipse occurred at orbital phase φ_orb = 0.468
- Quiescent Spectrum: Dual-temperature CIE model (2×vapec)
- Flare Spectrum: Four-temperature CIE model (4×vapec) plus interstellar absorption (tbabs)
- Time-resolved Spectroscopy: Extracted spectra before, during, and after eclipse for comparative analysis
- MAXI: All-sky X-ray imaging monitor with 92-minute scan period
- NICER: Neutron Star Interior Composition Explorer for pointed X-ray observations
- TESS: Transiting Exoplanet Survey Satellite providing optical comparison data
- HEASoft v6.33.2 for data calibration
- Xspec v12.14.0h for spectral fitting
- SCORPEON background model for background subtraction
- Light Curve Fitting: Dual error function used to determine eclipse start and end times
- Orbital Phase Analysis: Combined with O-C correction for precise phase determination
- 3D Radiative Transfer Simulation: SKIRT package used to verify geometric models
- Peak Luminosity: 6.20±0.98×10³² erg s⁻¹ (2.0-5.0 keV)
- Decay Timescale: e-folding time of 18±1 ks
- Eclipse Duration: 5.8 hours
- Flux Decrease: Reduced to 20% level during eclipse
| Parameter | First Observation | Pre-eclipse | During Eclipse | Quiescent |
|---|
| Hard X-ray Flux (10⁻¹¹ erg cm⁻² s⁻¹) | 44±0.5 | 19±0.3 | 4.5±0.1 | 1.1±0.1 |
| High-temperature Component (keV) | 4.15±0.11 | 3.96±0.19 | 3.26±0.20 | 2.01±0.09 |
| Emission Measure (10⁵³ cm⁻³) | 45±0.4 | 19±0.5 | 3.9±0.1 | 2.0±0.1 |
- Location: Southern latitude 45° on Algol B surface
- Height: H = 1.9×10¹¹ cm = 0.8 R_B
- Occultation Degree: 80%
Using the Shibata & Yokoyama (2002) formula:
L=109(1048cm−3EM)3/5(109cm−3n0)−2/5(107KT)−8/5cm
Calculated loop length L = (0.6-3.5)×10¹¹ cm, corresponding to height H = (0.3-1.7)×10¹¹ cm, consistent with geometric analysis results.
Observed increase in hydrogen equivalent column density N_H to maximum value (3.10±0.13)×10²⁰ cm⁻² before eclipse, possibly indicating occurrence of coronal mass ejection.
- August 30, 1997: BeppoSAX observation with flare height ≤0.6R_B, occurring in polar region
- February 12, 2002: XMM-Newton observation with flare height ≈0.1R_B, occurring in non-polar northern hemisphere
- Traditional Observations: Relied on chance discoveries, lacking systematicity
- Modern Time-domain Astronomy: MAXI-NICER coordinated system enabling rapid response observations
- Analysis Methods: Introduction of O-C correction improving orbital phase determination precision
- Successful Observation: First successful capture of Algol eclipsing flare through pre-planned coordinated observations, demonstrating the effectiveness of the MANGA system
- Flare Characteristics: Determined precise parameters of the 2018 flare, representing one of the largest-scale eclipsing X-ray flares observed to date
- Method Verification: Eclipse geometry and magnetic reconnection model provide consistent flare size estimates, validating the reliability of analysis methods
- Physical Processes: Observed possible CME phenomenon, providing new insights into stellar flare physics
- Spatial Information: Overcame limitations of stellar flare spatial resolution, obtaining three-dimensional structural information about flares
- Theoretical Verification: Supports the view that stellar flares follow similar standard models as solar flares
- Observational Techniques: Demonstrates the important role of multi-wavelength coordinated observations in time-domain astronomy
- Sample Size: Analysis based on single event only; requires larger statistical samples
- Model Assumptions: Flare geometric model employs simplified cylindrical structure assumptions
- CME Evidence: CME interpretation of N_H increase requires additional independent evidence
- Time Resolution: Limited by observational time resolution, potentially missing rapid variation processes
- Systematic Observations: Establish larger sample database of eclipsing flare observations
- Multi-wavelength Research: Comprehensive analysis combining radio, optical, and other multi-wavelength data
- Theoretical Modeling: Develop more refined three-dimensional magnetohydrodynamic models
- CME Research: Investigate physical parameters and propagation characteristics of stellar CMEs
- Innovative Observational Strategy: MANGA system represents transition from passive discovery to active follow-up observation mode
- Multi-method Verification: Independent geometric and spectroscopic analyses mutually verify results, enhancing credibility
- Precise Analysis: Introduction of O-C correction and other detailed processing improves orbital phase determination accuracy
- Rich Scientific Content: Not only determines flare parameters but also discovers possible CME evidence
- Statistical Limitations: Analysis based on single event lacks statistical significance
- Model Simplification: Flare geometry employs idealized cylindrical model, potentially differing from actual situation
- Temporal Coverage: Missed detailed observations of flare peak phase
- Uncertainties: Certain key parameters (e.g., pre-flare electron density) depend on assumed values
- Methodological Contribution: Provides new analytical paradigm for studying stellar flare spatial structure
- Technical Demonstration: Showcases capabilities of modern time-domain astronomy rapid-response observations
- Theoretical Support: Provides important observational constraints for stellar flare theoretical models
- Future Applications: Establishes methodological foundation for similar eclipsing binary flare research
- Eclipsing Binary Systems: Directly applicable to other eclipsing binaries with active companions
- Time-domain Astronomy: Provides reference for rapid follow-up observations of other transient phenomena
- Stellar Physics: Provides observational tools for studying stellar magnetic activity and flare mechanisms
- Comparative Research: Provides data support for comparative studies between stellar and solar flares
This paper cites 82 relevant references, primarily including:
- Shibata & Magara (2011): Review of solar flare standard model
- Favata & Schmitt (1999): Historical Algol flare observations
- Matsuoka et al. (2009): MAXI mission introduction
- Gendreau et al. (2016): NICER mission description
- Baron et al. (2012): Algol system fundamental parameters
This paper represents significant progress in stellar flare observational research. Through innovative observational strategies and refined data analysis, it provides valuable scientific data for understanding stellar magnetic activity phenomena. Although analysis based on a single event has certain limitations, its methodological contributions and scientific discoveries establish a solid foundation for subsequent research in this field.